Kawasaki KLR Forum banner

trouble with new corbin seat

4K views 2 replies 3 participants last post by  Bowhog1 
#1 ·
any one else have trouble installing corbin seats.I had trouble getting everything lined up with the so called adjustable brackets,then they tell you to move the overflow hose and show you a picture the size of a quarter and it looks like the hose is in the same place!If anyone knows where to move the hose I could use the help.
 
#2 ·
Corbin Seat

I think I had the same problem. I thought the front tab went into the slot up front however it goes under the slot. My seat had about an inch gap between the tank and the seat when I tried to fit it into the slot. I thought long and hard about bending the tab but decided against. I took it for the first service, and they moved the tab under the slot. Now there is only about a quarter inch gap between the seat and tank. No issues since
 
#3 ·
Trailtraveler...remove the front tab and shim it with a couple of flat washers.The tab will slide under the tank mount instead of through it. I routed the vent hose between the left tank bolt and frame..horseshoed it over the bolt and reconnected it. Dual platform slid right into place.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top