My stock tool kit has never left the bike. I dont even know whats in it.
This is my kit, it goes everywhere my bike does.
-double ended wrench, one side fits the front axle, the other fits the rear
- double ended gearwrench 12mm /13 mm for tube valvestem/ axle adjuster
- needlenose pliers with wire cutters
- 10mm combo wrench
-Tube repair kit/valvecore wrench/tire pump/C02 air charge/psi gauge
spare tubes/tire irons
- metric allen wrench set.
- small needlenose visegrips
- small reg.visegrips.
- small cresent wrench
-1/4 drive metric from 8mm-13mm set w/ rachet and 3 inch extention.
- roll of elec. tape/zipties/safety wire/ elec. wire/ orange and blue wirenuts/ a small pencil with duct tape rolled onto it/ extra metric bolts /nuts /spare fuses.
-Original headlight buld wrapped in papertowels stuffed in replacements package.
maybe some other stuff I'm sure. But, thats the jist of it. (fingers crossed) Thats all I ever needed.
Also have a spare clutch cable too. some day when I have it far enough apart, I'm going to zip tie it in where it belongs.
I keep all the tools in a bag on the front fairing this pic shows the old bag, The new one is brown camo and a lil bigger
The Clutch cable and headlight bulb are stuffed into this case.