General Forum
KLR 650
Classifieds
Vendor Member Section
This section is for vendors that help support our website. If you are interested in becoming a supporting vendor, please email [email protected]
Forum News
Regional Forums
Latest Posts
-
Gadgets & GizmosThe recent thread about this turned into a mess, due to some really bad info and a guy setting up to sell his version of a copy of the TB2. Bill Watson aka Wattman came up with the idea a long time ago, IIRC he started the process about 2005. He made the original prototype in his home shop, and...
- 31
- 614
-
-
1987 through 2007 KLR650 Wrenching & ModsThe bike backfires while spinning over, but will not start. Carb was pulled and cleaned(all passages and jets), plug good and checked spark(good). Fresh fuel, tested petcock(good). Sidestand switch is bypassed. Backstory, the bike sat for a year or so, but it started, idled, etc. While riding...
- 2
- 42
-
Wrenching and Mods for Things Common to All YearsHow many times have you guys seen electrical gremlins that are just brutal to chase down? A few years ago I had one that turned out to be caused by the big IMS tank on a gen2. It was cooking the CDI. No vents on those, and on this bike it was trapping too much heat. When we pulled the black box...
- 19
- 304
-
Wrenching and Mods for Things Common to All Yearsso ive had this seat that came with my bike, today i threw it on for fun, me and my buddy swapped bikes, i noticed his seat was much softer, as he did mine but stiffer..(mines a 13 his 08) after looking, the seats also have different stitching, but similar shape and color (grey sides, no...
- 2
- 83