Mounted my EMGO to my 08 KLR. It was easy.
Here is what I did.
1) I had a couple of strong spring clamps and they held the base to the flat rack on the KLR. (I put it so I can still get to my tool bag).
2) With the clamps holding the base I took a 15/64" drill bit and drilled four holes near the corners. I used the holes that were already in the EMGO to start the holes.
3) I used the bolts supplied with the EMGO but I put washers underneath along with some locking nuts.
It is a solid mount and is as low as possible. Nice looking too.
Scroll down for pictures.
Last edited by Tifford; 05-12-2009 at 10:08 PM.
Reason: more info.