I would stress the fact that anyone that plans on working on their carb order some stainless steel hex head screws to replace them the stock screws with. ALSO I had to call JD's customer service and they helped me get past that brain fart I had, besides the screws being tough to get out of the float bowl, its was a fairly easy install. I had to use vise-grips to get 2 screws out and the carb was a PITA to get on and off. I rode the bike with the exhaust only a few miles then today a few miles with the JD Jet Kit and air box modes and the Jet Kit and air boxes modes were the biggest improvement. Much better throttle response! Thanks Again for posting..
Last edited by Mountaineer650; 03-10-2012 at 07:30 PM.