Kawasaki KLR Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 16 Results
  1. Wrenching and Mods for Things Common to All Years
    I already have a slip on exhaust but have not been able to find just a mid-pipe for my klr. Does anyone know where I could find one? Have searched several times on Internet with no luck. Thanks for any help. Stang
  2. Australia
    G'day Aussie compadres. I have a 2016 KLR with Staintune slip-on and would like to revert to something quiet, preferably stock. I'm willing to swap for free. Anyone interested can call me 0429 103 105. Cheers, Paul
  3. 2008 through 2018 KLR650 Wrenching & Mods
    Torqued the acorn nuts on my exhaust header before a 350 mile trip. Just checked them and one was loose again. I’m going to ride today and check torque again when I get back home. I know the manual calls for anti seize, and I understand why with high temp, but is this just a thing I’ll deal with...
  4. 2022+ KLR650 Wrenching and Mods
    Just finished installing the Yoshimura RS-2 slip-on exhaust. This was my first time swapping out an exhaust. Pretty straightforward for the most part, although the instructions are fairly vague so some of that ol' common sense brain figuring came into play. I came away with a few notes and...
  5. Wrenching and Mods for Things Common to All Years
    Just bought a 2015 w an aftermarket exhaust and it sounds AMAZING but it's too noisy for my neighborhood. Is the stock exhaust the quietest/easiest replacement option?
  6. 2008 through 2018 KLR650 Wrenching & Mods
    I took my carb off to inspect it and clean the gunk out if it. I didn’t adjust any screws, change any gaskets or swap out any jets. When I put everything back together, the bike started up fine, but was running hot and the exhaust pipe started glowing hot. Any ideas why this happened? I tried to...
  7. 1987 through 2007 KLR650 Wrenching & Mods
    Is anyone using a Leo Vince slip on with the fmf headpipe I need a full exhaust system replacement and I don't want to have to worry about repacking my exhaust 2007 klr 650
  8. 2008 through 2018 KLR650 Wrenching & Mods
    I had someone message me about my LEXX MXe exhaust I have on my KLR 650 2010 model, so I made a video to show the sound note, feel free to check it out: https://youtu.be/1K7L9870fJ4 Ross
  9. 2008 through 2018 KLR650 Wrenching & Mods
    Just got my KLR last month. The PO did what I would consider a "botched" job of attempting to ream out the stock tailpipe to get a better sound, and actually cut out the pipe end with a screwdriver and left it sitting in there rattling around. I managed to get the pipe end out of the silencer...
  10. 2008 through 2018 KLR650 Wrenching & Mods
    Hey guys, love my bike but not fond of the sound- don't care about 5 more hp, just want better sound, no carb mods either, just slip on for better sound- HELP!!!
  11. 2008 through 2018 KLR650 Wrenching & Mods
    Opinions-Most Important Performance Mods I just sold my '05 636 Ninja. Now the only street-legal bike I currently have is my good 'ol '06 KLR 650. I've loved the bike for what it is and have put over 10k miles on it over the last 2 years (a fair amount owning 3 bikes). But now that I no...
  12. 2008 through 2018 KLR650 Wrenching & Mods
    I put the $149 end can on today. The install took about 5 minutes. I didn't like the tension of the included springs so I used some leftovers I had from my zx10 Brock's exhaust. I've not started her yet, letting the RTV cure, but it looks sweet:) It saved quite a bit of weight as well. Now I...
1-12 of 16 Results
Top