Kawasaki KLR Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 8 Results
  1. 2008 through 2018 KLR650 Wrenching & Mods
    As many before me, I lost/broke the rubber hockey puck dampers that the gas tank sits on. Shipping was double the cost of the puck itself, and the stores near me wouldn't help either. I had tried winding electrical tape around the pegs to no avail (they just sloughed off at the slightest budge)...
  2. 1987 through 2007 KLR650 Wrenching & Mods
    Hi everyone, Attempting to install the 10 Gallon IMS tank. The directions they gave me are for the Gen 2; it's supposed to attach to the radiator with a bracket, and the radiators for Gen 1 vs Gen 2 are quite different. I checked and was unable to see if anyone else had a similar issue. I...
  3. 2008 through 2018 KLR650 Wrenching & Mods
    I'm out of ideas. I removed the tank from my 2014 KLR 650 and I CANNOT get the mounting holes to line back up. I've taken the tank off and put it back on more times than I'd care to admit and struggled with it for 2 nights now. Every time I put it back on, the right side mounting hole is...
  4. KLR & Other Motorcycle Related Discussion
    Can I put a gas gauge on my klr 650 it's a 2012??
  5. 2008 through 2018 KLR650 Wrenching & Mods
    Hi folks! I just replaced the spark plug to my 2018 KLR 650 and when I disconnected the gas lines of the Vapor Recovery System from the back of the tank I did not mark which hose went where. I thought I reconnected them right but when I started the motorcycle it went on for a minute kind of...
  6. 2008 through 2018 KLR650 Wrenching & Mods
    Is there any difference between the gen 1 and 2 gas tanks? I have a gen 1 bike that needs a new tank... and gen 2 tanks are significantly cheaper. Advice?
  7. 1987 through 2007 KLR650 Wrenching & Mods
    Hi, I'm new to the forum and have just started working on a 1995 KLR 650 with 2,200 miles. It looks like it sat for about 3 years with half a tank of gas. I have the tank off and have been trying to flush it. There is some surface rust in the tank, any suggestions how best to clean the tank for...
1-7 of 8 Results