Kawasaki KLR Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. KLR FAQ's & Useful Links
    So I bought a Tusk top end gasket kit for my engine since I'm doing a rebuild and 685 kit. The Tusk kit comes with several O-rings big and small and I can't for the life of my figured out what there for if anyone can give me a quick answer id really appreciate it.
  2. Introductions
    i topped off my '07 nissan titan and it cost $60 for just under half a tank of gas. so i started looking at adventure bikes and really liked the klr650. the next morning i stopped by my local dealer and walked in to view the used bukes and low and behold of the nine bikes one is a klr650 staring...
  3. KLR & Other Motorcycle Related Discussion
    I have a 1994 klr 650 that needs new tires, currently running Dunlop k750 in front and rear.. front tire is stock size 90/90-21 and rear tire size is stock 130/80-17.. The shop I went to recommends I go with Shinko 705’s ...the front tire size 90/90-21(stock size) and putting a 120/70R17 on in...
  4. 2008 through 2018 KLR650 Wrenching & Mods
    They look like they don't fit but I don't know if I'm just looking at them wrong. Any help would be appreciated
  5. 2008 through 2018 KLR650 Wrenching & Mods
    I own a 2016 klr 650 and I was trying to install a klr 600 kick start. Over the last couple months I've taken my entire engine apart and swapped part of the transmission with a 2010. I swapped the out put shaft that connects to the sprocket so I could add a idler gear on the end. Well I ran into...
  6. 2008 through 2018 KLR650 Wrenching & Mods
    I'm out of ideas. I removed the tank from my 2014 KLR 650 and I CANNOT get the mounting holes to line back up. I've taken the tank off and put it back on more times than I'd care to admit and struggled with it for 2 nights now. Every time I put it back on, the right side mounting hole is...
  7. 1987 through 2007 KLR650 Wrenching & Mods
    I noticed a weird sound coming from the front sprocket area when I changed my rear wheel, rear sprocket and chain. The sound isn't affecting how the bike runs (still rides like a champ) but it concerns me to go past 3rd gear because the sound gets louder from 1st - 2nd - 3rd (I don't want to...
  8. KLR & Other Motorcycle Related Discussion
    Hey everyone, I'm new here. I just picked up a 1984 KLR600. It has a PWK aftermarket carburetor. I'm having trouble making it run well. Not enough gas/too much air. I'm still playing around with the A/F and the jets and I'm getting closer but I just realized that this isn't the stock carb! The...
  9. Gadgets & Gizmos
    Hi, so I'm looking at buying two kick start assembles from a klr 600. Does anyone have any tips on where to find any parts. I've been looking on eBay and partzilla but most parts aren't available. If anyone has any leads I'd greatly appreciate it. Thanks
  10. 1987 through 2007 KLR650 Wrenching & Mods
    Can't pinpoint the source of the noise, at first I thought there was an issue with the electrical/gauges until I hit highway speeds and it was louder than the wind. Sounds like an intermittent chafing of metal pieces. But only when the bike is being fed throttle, and ruled out the possibility...
1-10 of 10 Results