Kawasaki KLR Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Wrenching and Mods for Things Common to All Years
    Long story short, somehow or other the rear brake never released from the rotor, and I didn't notice until a brother rider pulled me over. The pads were smoking with the heat generated. Pulled the pads off the rotor no problem, but then found that the brake doesn't work. Tried bleeding it, but...
  2. Wrenching and Mods for Things Common to All Years
    Have been wanting to upgrade my rear brakes. So I've come up with the plan to swap over to a gen2 swingarm and brake system. My worries are if the gen1 rear hub will jive with it. I'm also curious if I would be able to run the same rotor. Thanks for any help in advance.
  3. 1987 through 2007 KLR650 Wrenching & Mods
    Hi one and all - Recently bought a 2000 650c, and need to do a bunch of work on it to get it roadworthy. I did the fork seals yesterday, today wanted to get the rear brake working. There was no brake feel whatsoever so my first step was to bleed the system. Attached some hose onto the bleed...
1-3 of 3 Results