Kawasaki KLR Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. 2008 through 2018 KLR650 Wrenching & Mods
    Anyone have a source for the harness end of the ignition switch connector for a 2016? I'm working on a theft recovery bike and the harness has been hacked at the connector and the harness end is missing. As a second choice I'd take a good source for a waterproof 6 pin connector (both sides) that...
  2. 2008 through 2018 KLR650 Wrenching & Mods
    Bike is a 2008 with 8354 miles. I got the bike in august with 7550 miles on it. In this thread I'd like to go over some things I've already done to the bike and others that Im looking to do. I've been trying to rule out all the known problems with these bikes and rectify them the first time I do...
  3. Wrenching and Mods for Things Common to All Years
    Hi all, wanted to run this by everyone and see if folks had any suggestions, tips, etc. I haven't completed too much electrical wiring so I hope to get some guidance here. I'm setting up a new Garmin Montana 700i and purchased a KLR lower dash to power it. I also bought a third party set of USB...
  4. KLR & Other Motorcycle Related Discussion
    This site has helped me a lot, so it's time to join. I have a real mystery. If anyone can help, I'd be so appreciative. I love working on bikes, but this has stumped me. I almost never do electrical work... Last fall, my 2008 KLR was running fine until it sat for about 2 weeks (under cover). I...
  5. KLR & Other Motorcycle Related Discussion
    Hi all. Tonight my KLR just died on me while driving down the road and after a struggle to finding a new fuse as the main fuse blew the starter would not engage. I ended up push starting the bike as I had to get it out of that area, but then about 50m up the road the bike completely died on me...
  6. 1987 through 2007 KLR650 Wrenching & Mods
    Hey Everyone, I just picked up a 1993 KLR today with only 4500mi on it, but it's sat for a long time. I know I gotta go through and replace the cables (rusted and super stiff) and change ALL of the fluids (Did that as soon as I got the bike home). However The wiring was a bit of a mess on the...
  7. 1987 through 2007 KLR650 Wrenching & Mods
    Greetings Riders , I have been spending alot of hours trying to get my KLR running and some help from more experienced riders would be , hopefully , a puzzle solver in this one. First of all my bike is a KLR 650 Tengai 1991 (Gen 1) I had a no spark problem so i decided to buy another klr for...
  8. KLR & Other Motorcycle Related Discussion
    I just lost headlight, high and low beam. I checked the bulb and all the wire connections I have found. Any ideas on what I am not finding? Am I missing a hidden fuse? Help,lol. Thanks, Craig
1-8 of 8 Results
Top