Kawasaki KLR Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1 (Edited)
Hey guys i've got a 2013 model that will start in neutral with no problems but as soon as I select first it will stall. I read another post suggesting roll back in forth in first to try and "loosen" the clutch, or giving the throttle a few blips and selecting first.
I have been playing around with these methods with no success. It will only start in neutral.
With the bike off, in first with clutch pulled it is stiff to get moving but does start to loosen after a while, but will go back to being quite tight after trying to start.
Engine will not turn over in any gear except neutral any help would be greatly appreciated,
cheers
Andrew

I should add, I did about 100kms yesterday, and didn't notice anything out of the ordinary
 

·
Administrator
Joined
·
8,292 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #6
yep plenty of impatience, but it was a damaged side stand switch cable,
thanks for the help guys,
andrew
 
1 - 7 of 7 Posts
Top