Kawasaki KLR Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
I would suggest you send it to Woodies wheels in Denver. Pounding on a bent rim is not the correct approach to take with any laced wheel. To correctly do it you need to loosen the spokes and press the bend out not pounded it out. You start pounding on a wheel you’re just gonna create more problems for yourself. To press the bend out the spokes on the opposite side of the bend need to be loosened, to take the pressure off the bent side so it can be moved out, it is a complicated process to do it correctly.
but if you don’t care pound away and don’t be surprised how untrue the wheel will run
 
1 - 1 of 1 Posts
Top