Kawasaki KLR Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
709 Posts
Get down on the right side of the bike and take a look at the area where the horseshoe-shaped bracket on the tank engages the rubber puck on the frame. Chances are you will see that the puck is not fully engaged in the tank bracket, which suggests that you have not pushed the tank forward sufficiently on the right side. To make full engagement easier, I will sometimes lube both rubber pucks with Vaseline before installing the tank.

Jason
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top