Kawasaki KLR Forum banner
1 - 4 of 4 Posts

Premium Member
39 Posts
Discussion Starter · #1 ·
Completed this today. Being the genius that I am I forgot to take a “before” picture of the piece, but I ground off close to 1/8th of those two end pieces that stick out (those were closed originally). And before you post, those screws holding the ground pieces on appear to be permanently affixed that way, so I didn’t force it.

Automotive lighting Motor vehicle Automotive tire Trunk Bumper

When installed, the board will sit inside the brake light cover resting along the angled plastic with just enough room to reseat the cover and secure it.

Automotive parking light Land vehicle Tire Vehicle Motorcycle

As y’all can see, it’s way brighter than stock…and that’s without the brake actually applied. Great piece of kit to add…the horn is next.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.