Kawasaki KLR Forum banner
1 - 12 of 12 Posts

·
Registered
2008 KLR 650
Joined
·
11 Posts
Discussion Starter · #1 ·
30218


30219


I've been trying to work it out for the last hour, but I'm a knucklehead. Any tips from you geniuses would be greatly appreciated. Thanks
 

·
Registered
Joined
·
665 Posts
And if you're using an AGM or lithium ion battery you can remove the vent tube bracket and reduce the sprung weight by a few grams--at least that's what I did on a rainy day. Note to Dave: please don't look at my rear shock! ;)

Motor vehicle Automotive tire Bumper Coil spring Automotive exterior

Jason
 

·
Registered
Joined
·
415 Posts
And if you're using an AGM or lithium ion battery you can remove the vent tube bracket and reduce the sprung weight by a few grams--at least that's what I did on a rainy day. Note to Dave: please don't look at my rear shock! ;)

Jason
You do realize that has drastically reduced the resale value! 🤣
 
  • Like
Reactions: Bruce Nauman

·
Registered
Joined
·
415 Posts
What do you mean? It is a lowly KLR650! Nzzz'sever going to be a museum piece.! :)
What? This is the first I've heard of this. Are you sure.🤣
 
  • Like
Reactions: Bruce Nauman

·
Premium Member
Joined
·
8,899 Posts
What? This is the first I've heard of this. Are you sure.
My 1987, VIN 000423 sort of looks like an old weathered barn. Sturdy, but faded.
 

·
Registered
Joined
·
415 Posts
1 - 12 of 12 Posts
Top