Kawasaki KLR Forum banner
1 - 1 of 2 Posts

· Administrator
10,241 Posts
Inlet valve issues are seldom the fault of the float. Almost all used inlet valve needles look good, but they aren't if there is a leak. The seat can also be a problem. If you want to fix it, then clean the seat and replace the valve, then check the fuel level in the bowl.

Automotive tire Gas Machine Rim Auto part

Fill the carburetor with fuel and attach a hose as shown. Open the drain screw and observe the fuel level in the hose.
Light Automotive tire Motor vehicle Line Gas
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.