Kawasaki KLR Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,063 Posts
Discussion Starter #1
Does anyone know where I can get these connectors?

 

·
Administrator
Joined
·
8,362 Posts
Those look like Hitachi .110" style connectors.

Motorcycle 2.8mm - 110 Connector and Terminals

Similar Sumitomos, but .090"

Sumitomo HD Non-Sealed Connectors and Terminals

You should get to know Joe at Cycle Terminal.

He has the connectors and the crimping tools for motorcycle wiring. He's done an admirable job of running down reasonably priced tools that will do the job well and last. Though you could crimp those connectors with care and a pair of pliers, this Eclipse tool will do the job with professional results. Open Barrel Crimp tools
 

·
Registered
Joined
·
1,063 Posts
Discussion Starter #3
Connectors

Thanks Tom

I did come across that site in my search. I want to be sure that the ones I order match the few I have on hand.
Can you explain the dimensions listed? Does the .110" mean the width of the male pin that slides into the mating female pin, or something else?

The plastic part look identical.
 

·
Administrator
Joined
·
8,362 Posts
The 110 does describe the width of the male connector, at .110".

If you have any doubt, get in touch with Joe through his website and ask his advice.
 

·
Administrator
Joined
·
3,568 Posts

·
Registered
Joined
·
1,063 Posts
Discussion Starter #6
Connectors

Thanks guys!
 
1 - 6 of 6 Posts
Top