Kawasaki KLR Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
216 Posts
Discussion Starter #1
Have a small bit of oil coming out where the clutch cable goes into the engine. The little mechanical part that the cable goes into on the right side. How do I go about fixing that?


Crash
 

·
Administrator
Joined
·
8,250 Posts
Order up a new seal, p/n 92049-1560 SEAL-OIL (double check that part number at your favorite vendor). It's about $5.

Remove the clutch cable from the case and then the arm, then rotate the arm back and pull it up.

Carefully pry this seal out of the case:


And even more carefully install the new seal.

Reverse the order of dis-assembly.

Tom
 
  • Like
Reactions: Normk

·
Registered
Joined
·
216 Posts
Discussion Starter #3
Sweet looks not to hard. It has 95K km on it now. Looks like my worm drive on my old 84 vt500c which I had to do.
Thanks

Crash
 
1 - 4 of 4 Posts
Top