Kawasaki KLR Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
Anybody have the following torque specs??

Clutch springs?
Water pump shaft nut?
Clutch/water pump cover bolts?

Thanks in advance.

1999 KLR 650
 

·
Registered
Joined
·
207 Posts
According to Mr Clyner

Clutch spring bolts = 80 in lb
Impeller nut = 88 in lb
Crankcase cover =
6mm = 71 in lb
8mm = 14 ft lb

Good luck
John
 

·
Registered
Joined
·
16 Posts
Discussion Starter #3
conversion?!?--HELP ASAP

are those foot inch pounds equal to like 7 ft. lbs of torque??

That doesnt seem like much for the springs, esp when 8mm cover screws are 14 ft lb?

But is it correct?
Thanks!!!!
 

·
Registered
Joined
·
603 Posts
greenrider.That is a GREAT FIND!!!!

Thanks for posting.

Mike
 
1 - 6 of 6 Posts
Top