Kawasaki KLR Forum banner
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
303 Posts
Pullled out my old squeaker OEM horn and put a Hi/Lo set of 2 horns from Hella. ($11 Amazon) Both fit back into the same location as the OEM horn with their own brackets. Just had to solder on jumpers for the extra horn connections. 108db View attachment 28423

How do they work? I want to install a louder horn on mine but am concerned if the existing circuit will reliably power them.
I was thinking a relay with direct power from the battery would be the way to go.
 

·
Registered
Joined
·
303 Posts
I changed oil in my KLR and adjusted the balancer chain.
While the drain plug was out I drilled it for a lock wire.
I put the plug in and torqued it to 180 in-lbs and lock wired it to
the skid plate.
 

·
Registered
Joined
·
303 Posts
I bought a drain plug like the one pictured above. I put it in a safe place for
my next oil change. Two oil changes later I still haven't found it.
 

·
Registered
Joined
·
303 Posts
What is your winterizing routine? I fill mine with ethanol free hi test gas
run it with the fuel pet-cock shut off till the carb is dry, clean oil or a fresh
oil change and connect the battery to a battery maintainer. It then spends
the winter in a heated shop.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top