Kawasaki KLR Forum banner

Side stand safety bypass. Why?

1.5K views 42 replies 18 participants last post by  AntonK  
So, if the kickstand comes down while running does it kill the engine? I would think it would have some type of override like the starter switch (at least on the Gen 3).
Yes, it kills the engine.
WE need to add, When it is in GEAR on Gens 2 & 3.

On Gen 1's it operates / kills the engine as one begins to Release the clutch lever.
One can tilt a Gen 1 onto its side stand and front wheel to lubricate the chain with the engine running & in gear as long as one doesn't release the clutch lever too far.
I much prefer the Gen 1 type of wiring for this feature. But the switch is operated by a cable between the stand & the switch and the cables get rusty/sticky.
I simply removed my rusty cable and left the switch in-place (fully electrically connected), as it is the mount point for the 6" long plastic cover over the switch & the starter relays.
 
  • Like
Reactions: NorthTxKLR